SystemThree SilverTip Low Viscosity Epoxy Resin
This low viscosity resin is used with any of the hardeners listed below. The resin to hardener ratio is always 2 to 1. The hardeners can be blended to modify your cure times depending on your work shop temperature and your time frame requirements
Please Note: All epoxy and varnish must be shipped through UPS. For an accurate estimate, please select UPS on the shipping screen.
-
SystemThree SilverTip Low Viscosity Epoxy Resin
$50.95 – $133.95 Select options This product has multiple variants. The options may be chosen on the product page
SystemThree SilverTip Slow Hardener
This No Blush hardener works well in a temperature range of 65 to 90 degrees. At 65 degrees you will have a 10 hour green cure stage. The next coat will chemically bond to the uncured epoxy.
Please Note: All epoxy and varnish must be shipped through UPS. For an accurate estimate, please select UPS on the shipping screen.
-
SystemThree SilverTip Slow Hardener
$33.95 – $148.95 Select options This product has multiple variants. The options may be chosen on the product page
SystemThree Silvertip Fast Hardener
You can blend this hardener with the slow hardener to customize your cure time OR you can use this Fast Hardener by itself in situations where you want to achieve a fast, sandable cure within 24-36 hours. This is a non-blushing Fast Hardener.
Please Note: All epoxy and varnish must be shipped through UPS. For an accurate estimate, please select UPS on the shipping screen.
-
SystemThree Silvertip Fast Hardener
$33.95 – $84.95 Select options This product has multiple variants. The options may be chosen on the product page
